Enable/Disable ping response

How do I disable the ping response?

Add the following line to your init script for the network (the name depends on the distribution you use):

echo 1 >/proc/sys/net/ipv4/icmp_echo_ignore_all

This disables ping responses.

To make this permanent set the following into /etc/sysctl.conf (if you have such a file)

net.ipv4.conf.icmp_echo_ignore_all = 1

 

To reenable, use the following command:

echo 0 >/proc/sys/net/ipv4/icmp_echo_ignore_all

and add the same line in /etc/rc.local to make it permanent.

 

Linux Iptables allow or block ICMP ping request

The Internet Control Message Protocol (ICMP) has many messages that are identified by a “type” field. You need to use 0 and 8 ICMP code types.=> Zero (0) is for echo-reply

=> Eight (8) is for echo-request.

To enable ICMP ping incoming client request use following iptables rule (you need to add following rules to script).

My default firewall policy is blocking everything.

Task: Enable or allow ICMP ping incoming client request

Rule to enable ICMP ping incoming client request ( assuming that default iptables policy is to drop all INPUT and OUTPUT packets)

SERVER_IP="202.54.10.20"
iptables -A INPUT -p icmp --icmp-type 8 -s 0/0 -d $SERVER_IP -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A OUTPUT -p icmp --icmp-type 0 -s $SERVER_IP -d 0/0 -m state --state ESTABLISHED,RELATED -j ACCEPT

Task: Allow or enable outgoing ping request

To enable ICMP ping outgoing request use following iptables rule:

SERVER_IP="202.54.10.20"
iptables -A OUTPUT -p icmp --icmp-type 8 -s $SERVER_IP -d 0/0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -p icmp --icmp-type 0 -s 0/0 -d $SERVER_IP -m state --state ESTABLISHED,RELATED -j ACCEPT

How do I disable outgoing ICMP request?

Use the following rules:

iptables -A OUTPUT -p icmp --icmp-type echo-request -j DROP

OR

iptables -A OUTPUT -p icmp --icmp-type 8 -j DROP

ICMP echo-request type will be block by above rule.

See ICMP TYPE NUMBERS (type fields). You can also get list of ICMP types, just type following command at shell prompt:
# /sbin/iptables -p icmp -h

Advertisements
  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: